100
B.5. FACTORY SETTINGS
The unit starts as soon as the control panel is in heating mode, the requested room temperature has
not been reached and the water temperature is > 28 ̊C.
Only with configuration code DPC.HCA523!
The unit starts as soon as the control panel is in cooling mode, the requested room temperature has
not been reached and the water temperature is < 24°C.
Off
All functions are disabled until the user switches
on the unit via the control panel.
Activator speed in function of the difference
between the set temperature (Tset) and the room
temperature (Tk).
Boost function
: The unit runs at maximum speed for
15 minutes.
Off
The unit is controlled based on the requested and measured temperature .
Configuration code : DPC.HCA423 / DPC.HCA523
Activator speed in function of the difference between the
set temperature (Tset) and the room temperature (Tk).
Min
1
0
10
BMS (V)
Max
Difference Tset-Tk (
0°
C)
C. TEMPERATUURMODUS
[A]
1
MODE
Option:
Thermo-electrical motor
Control
MODE
MODE
MODE
Tw < 24ºC
Tw > 28ºC
Off
Tset < Tk
Tset > Tk
