65
EN
JAGA NV | BRIZA RAD 055/041 | MANUAL | 5 JULI 2021, 14:29 | V.01
6.4. FACTORY RESET
1.
Disable power charge .
2.
Press and hold down both the [-] and [+] button on the circuit board
and switch on the power again.
The blue LED
will light up, followed
by
the green LED
2 seconds later and
the red LED
4 seconds late
r
.
Release the buttons as soon as all 3 LEDs are flashing .
3.
The controller will return to the Factory settings, all LEDs will flash for 10 seconds. The controller
will return to the Factory Default settings, all LEDs will flash for 8 seconds .
1
-
6.3. CIRCUIT BOARD ERROR CODE
1
Check the watertemperature sensor
Check the room temperature sensor
