background image

 
 

General Usage 

 

Keep the firepit clean and free of leaves and debris to ensure safe operation. Do not operate the firepit without first  

    ensuring it is clean. 

 

Keep a portable fire extinguisher or other approved extinguishing equipment, such as a garden hose, readily available  

    when operating this firepit. 

 

Do not store or use gasoline or other flammable liquids or vapors within the vicinity (50 ft) of this firepit. 

 

The surfaces of this outdoor firepit are hot when in use. To avoid burns, do not touch the firepit until it has cooled  

     completely, unless wearing protective gear such as potholders, gloves, and hot pads. Never touch ashes or coals to test  
     if they are hot. 

 

Avoid breathing smoke from the fire and getting it into your eyes. 

 

Do not lean over the firepit when lighting or while it is in use. 

 

Do not place a hot spark guard or hot firepit tools onto combustible surfaces such as grass, wooden deck, or furniture. 

 

Do not use this outdoor firepit for indoor heating. Toxic carbon monoxide fumes can accumulate and cause asphyxiation. 

 

Keep all electrical cords away from a hot firepit. 

 

Using alcohol, prescription or non-prescription drugs may impair ability to properly assemble or safely operate the firepit. 

 

Do not operate the firepit if: 

 

There is a lightning storm or a possible lightning storm. 

 

High wind conditions are present. 

 

Do not place clothing or other flammable items on or near the firepit. 

 

If the firepit is not operating properly in any fashion or if you are uncertain, call your dealer for a full explanation of your 

    firepit and what to expect. 
 

Maintenance 

 

Do not remove, replace, modify or substitute any part of the firepit unless instructions are given in this manual for routine 

maintenance and cleaning 

 

Allow the firepit, ashes, and coals to extinguish and cool completely before moving, maintaining, or cleaning. 

 

Replace any screen or guard removed for servicing before operating the firepit. 

 

Do not use oven cleaner or abrasive cleaners as they will damage the finish. 

 

Check for signs of damage and creosote build-up after storage or period of non-use. Do not operate until necessary  

    repairs or cleaning have been made. 
 
 
 

Manual and Warranty 

 

Operate the firepit according to the instructions included in this manual. The instructions in this manual must be strictly  

     adhered to. Do not use makeshift methods or compromise in the installation. Improper installation will void the warranty 
     and safety listing. 

 

Do not throw this manual away. This manual has important operating and maintenance instructions that you will need at a  

     later time. Always follow the instructions in this manual. 

 

Death, serious injury, or damage to property may occur if the above are not followed exactly. 

 

The JAG Grill, LLC. grants no warranty, implied or stated, for the installation or maintenance of your firepit,  

     and assumes no responsibility of any consequential damage(s). 
 
 
 
 
 
 

 

3

FORM #006310 REV. 1

Summary of Contents for Grill























Reviews: