43
Fitting the strap sections onto the case
- Hold the back of the watch case between the thumb and forefi nger of one
hand.
- Hold the strap section between the thumb and forefi nger of your other hand,
and position its spring bar in the lug housings.
- Keeping the strap parallel to the case, insert the spring bar fi rmly into the
housings.
If you change straps, you can fit the folding clasp on your new strap:
Removing the folding buckle
- With one hand hold the strap section, and take the tool in the other hand.
Position the tool vertically on the end of the visible spring bar. Press vertically,
and the spring bar will be released.
- While maintaining pressure on the spring bar, tilt the strap section outward to
release it.
Refi tting the folding buckle
- Place one end of the strap section spring bar in the appropriate clasp housing.
- With one hand hold the strap section in the housing, and take the tool in the
other hand. Position the tool vertically on the other end of the spring bar.
Press vertically.
- While maintaining pressure on the spring bar, bring the strap section back
against the clasp. Release the pressure on the bar at the last minute so that
the spring has time to insert the bar in its housing.
English
