ROUGH-IN DIMENSIONS
H 9 6 5 8 8 5
TWO WAY
BODY
THREE WAY
BODY
NOTE: NO CONCEALED PIPING FURNISHED
1-5/8"
FINISHED
WALL
FINISHED
WALL
2-9/16"
3-1/8"
2-1/4"
ALL CONNECTIONS 1/2" NPT
Turn off hot and cold water supplies before beginning.
1
See Roughing-in Drawing on reverse side. The port with the BATH TUB picture is the high flow.
The DIVERTER can be installed with the inlet rotated in any position.
Supply connections are 1/2" NPT connections.
For proper positioning the finished wall must be within side of PLASTER GUARD.
Connect water to valve. The reverse side of the body is marked with arrows.
CAUTION: Do not solder near the VALVE. Damage to the SEALS may occur.
Do not seal any outlets. This DIVERTER cannot be used as a stop valve.
For support use pipe braces secured to wooden braces.
ROUGHING-IN
MAX
MAX
CAUTION:
DO NOT SEAL ANY OUTLETS. DIVERTER
CANNOT BE USED AS A STOP VALVE.
Plumbers' Putty or Caulking
Adjustable Wrench
Phillips Screwdriver
Channel Locks
Tubing Cutter
Regular Screwdriver
RECOMMENDED TOOLS
