Jadever JWE, User Manual

Page: 7 / 16

JWE 6
5-4 Simple Counting
1) Under the weighing mode, press key
MODE
to select the unit “PCS”
2) Press key
MC/SET
to choose the sampling amount (Options are 25, 50 and 100), then
put the simples on the weighing pan.
3) Wait till the appearance of CAL
4) Two seconds later, the sampling action ends up with a beep.
5) Remove the samples, and put the load on, the scale calculates the amount of the load.
6) Remove the load and press key
MODE
to select the desired weight unit to go back to
weighing mode.
5-5 Percentage weighing
1) Under the weighing mode, press key
MODE
to select the unit “%”
2) Press key
MC/SET
to choose the percentage (Options are 25%, 50% and 100%), then
put the simple on the weighing pan,
3) Wait till the appearance of CAL
4) Two seconds later, the sampling action end up with a beep.
5) Remove the sample, and put the load on, the scale calculates the percentage of the load.
6) Remove the load and press key
MODE
to select the desired weight unit to go back to
weighing mode.
5-6 Accumulation, Accumulation Display & Accumulation Clearing
Accumulation
1) Under the weighing mode, put the item on the weighing pan. Press key
M+MR
at the
appearance of “ ” and the Accumulation Lamp Lights up.
2) Remove the item and the display goes back to zero before the next accumulation can
register.
（
The maximum is 99 pieces.)