SM-12
Jade Range LLC
– A Middleby Company
Titan
TM
Series Heavy Duty Range
Model Series JTRH, JMRH & JTRHE
REVIEW COPY
7
WARNING
RISK OF BODILY INJURY! OVEN SPRING IS
UNDER CONSIDERABLE TENSION. EXERCISE
GREAT CARE IN REMOVING OR REPLACING
SPRING.
2. Using an automotive brake spring pliers release
spring from eyelet as shown in Figure 5.
3. Remove wire S-Hook to rocker arm from oven
door hinge.
4. Loosen the four bolts that attach oven door hinges.
5. Remove door hinges from behind the door.
6. Using an assistant to support door, remove
four hinge bolts that attach hinges to frame.
7. Reverse the procedure to install the door.
Oven Kick Panel
Figure 6: Oven Kick Panel
A. Oven Kick Panel
B. J-Hook (on Hinge)
1. Lift oven kick panel straight up to release tabs
from retaining slots and pull out to remove.
2. To install the oven kick panel, insert tabs into
hinge J-Hook slots and slide panel towards
bottom of range.
COMPONENT REMOVAL
Top Section Open Burner and Orifices
Figure 7: Top Section Open Burner
and Orifices
A. Manifold
B. Top Burners
C. Burner Control Valve with Orifice
D. Pilot Valve
WARNING
PERFORM THE ELECTRICAL LOCKOUT/
TAGOUT PROCEDURE.
1. Shut off all electrical controls and perform the
Electrical LOCKOUT/TAGOUT procedure.
WARNING
PERFORM THE GAS LOCKOUT/TAGOUT
PROCEDURE.
2. Shut off all gas controls and perform the Gas
LOCKOUT/TAGOUT procedure.
3. Remove top grates to expose burners.
4. Remove manifold cover as per COVERS AND
PANELS.
NOTE:
It is not necessary to remove pilot tubes in
order to remove burner assemblies.
5. Lift burner assembly at rear of range and
pull away from burner control/orifice to
remove.
6. Reverse the procedure to install the burner
assembly.
