manualshive.com logo in svg

Jade ACACIA TS-051, Installation Manual

Share
Download
Jade ACACIA TS-051 Installation Manual Download Page 9

INSTALLATION 

CONT’D

7

Installation of the Toilet Seat

METHOD A 

(WITH MOUNTING PLATE ):
1.   Install the mounting plate bolt for the toilet seat into the mounting hole on 

the toilet bowl.

2.   Turn the mounting plate bolt for the toilet seat with a screwdriver to secure 

the mounting plate. The tilted surface should face the front of the toilet 

bowl after you attach the mounting plate for the toilet seat.

METHOD B 

(WITH BOLTS ):
1.   Place the new toilet seat on the toilet bowl with the hinges over the bolt 

holes in the toilet bowl.

2.   Open the hinge caps if applicable.
3.   Drop the bolt through the open hinge and bolt hole.
4.   Screw the bolt until snug.

METHOD C 

(STANDARD)
5.   With the hinged section of the toilet seat, set the toilet seat on the 

mounting plate for the toilet seat.

6.   The securing screw for the toilet seat is used on the side of the toilet seat. 

(Without the securing screw, the toilet seat will be loose.) Insert the 

securing screw for the toilet seat into the mounting hole on the side of the 

toilet seat.

Summary of Contents for ACACIA TS-051













Reviews:

No comments

Brands by name

Popular brands

Load more brands