background image

OPERATION

7

Normal Operation/Whirlpool Sys-
tem

You can enjoy the spa with or without activating the

whirlpool.  Either way, bathing in your spa can be
pleasurable, as well as therapeutic.  After a busy,
stressful day, you can look forward to soaking in your
spa in still water with no turbulence—only the gentle
warmth of the soothing and relaxing water.

For a more invigorating spa experience, you can

take advantage of the built-in whirlpool system.  Sit or
recline in the spa so you are comfortable.  The Magic
Touch

®

 whirlpool switch, conveniently located between

the built-in headrests, allows you to turn the whirlpool
system on while in the spa.  Simply push down on the
switch button to turn on the whirlpool system.  Pressing
once turns on high speed jets  Pressing a second time
turns off the whirlpool.

Since the jets are directionally adjustable, you can

direct a jet toward an area where muscles feels tense or
stiff.  The warmth of the water and the stimulating water
flow from the jets will pleasantly increase circulation.

For the total whirlpool effect and all over feeling of

well being, you can adjust the jets so they point in a
clockwise or counterclockwise direction to circulate the
air and water mixture in a whirlpool all about the spa.

AIR INDUCTION CONTROLS

INCREASE AIR FLOW
(COUNTERCLOCKWISE)

DECREASE AIR FLOW
(CLOCKWISE)

FULLY ADJUSTABLE
WHIRLPOOL JETS

Silent Air Induction

The intensity of the whirlpool action is determined by

how much air is inducted into the water.  You control this
by adjusting the air induction control knobs located on
spa rim.  For maximum air induction, rotate each control
knob fully counter clockwise to the largest circle.  For
fewer air bubbles, decrease the amount of air induction
by rotating the control knobs clockwise.  When the knobs
are turned to the smallest circles, only water is being
circulated.  (Refer to illustration below.)

DIRECTIONALLY ADJUSTABLE
WHIRLPOOL JETS

DEPRESS CENTER

W

HI

RLPOO

L

MAGIC TOUCH SWITCH

Summary of Contents for Z101

















Reviews: