Jacuzzi SKYLINE 190, Use & Maintenance

Page: 22 / 78

22
P
atented original well-being. The timeless Jacuzzi® hydromassage technology uses ad-
justable jets, used in all directions, which massage, stimulate and tone the entire body
extending to the legs right to the bottom of feet. Progressively gaining intensity, in a central
direction, and which involves all muscle parts, unwinding, energising and ultimately relaxing
the body.

Turn on the main switch and wait a few seconds until the start-up process has com-
pleted.

To activate the hydromassage, briefly press the button.
■
The hydromassage is programmed to last for approximately 20 minutes; the cycle will
automatically stop after this time.
Press the
button to stop the cycle before.
The hydromassage and suction nozzles on the tub remain closed if the hydromassage func-
tion is off. Press the button to open the air outlet; the hydromassage outlets open after a few
seconds.
The tub is fitted with an electronic sensor which prevents the pump s from starting if the water
level is too low. If, when you press the button, the pump s do not start and the spotlight (or the
hydromassage outlets for Illumatherapy™ models) flashes, you will need to add water and
press the button again.
The pump s stop even when there is an unexpected drop in the water level, caused, for exam-
ple, by somebody getting out of the tub. In any case, once the anomaly has been resolved
(power outage, drop in water level, etc.), the hydromassage function can be restarted using
the start button.
activate
the function
Pressing the button briefly illuminates
blue; therefore, the light returns white
stopping
the function
Hydromassage