10
1.
Level the tracks (B) and mark the track holes’ positions. 4 holes for each track.
2.
Remove tracks and drill pilot holes in the marked locations with a ø1/4”(6mm) drill bit.
3.
Insert the wall anchors (FF) using a rubber mallet until the wall anchors are flush with the wall.
4.
Replace and secure the 3 metal tracks (B) with screws (CC). Do not overtighten.
WALL TRACKS INSTALLATION
ø
1/4”
6mm
FF
CC
2
B
1 9/16”
40mm
4
1”
25mm
1
3
Base edge
Base edge
Helpful Hint
Make sure there
is a support stud
located behind the
drywall, behind the
tracks!
Helpful Hint
Do not overtighten!
This may crack the
acrylic walls.
30 1/8”
765mm
6 3/4”
172mm
37 1/2”
953mm
