6. After spa drains, perform steps 2-5 in reverse order to close drain prior to
refilling spa.
After refilling , turn on power to the spa and follow the steps listed
under “Start-Up Instructions.” Always fill your spa through both fil-
ter wall fittings (page 12).
11.3 Cleaning The Spa Interior
To preserve the sheen of your spa's surface, it is crucial that you avoid
using abrasive cleaners or cleaners which have adverse chemical effect on
the surface. If you are not certain as to the suitability of a particular
cleanser, consult your authorized Jacuzzi Premium dealer.
Regardless of the cleanser used, use extreme care to assure that no soap
residue is left on the surface. This could cause severe sudsing when the spa
is refilled. Your Jacuzzi Premium dealer offers a specially formulated surface
sealant which aids in cleaning the spa surface and adds a protective coat-
ing to enhance the luster of the surface.
11.4 Pillow Care
Remove and clean the headrest pillows as needed with soapy water using a
cloth or soft-bristle brush. To maintain water resistance and luster, apply a
quality vinyl conditioner once a month. Always remove the pillows when
adding chemical shock treatment to the spa water. The pillows can be
returned to the spa when the sanitizer reading drops below 5 ppm.
CAUTION:
Never attempt to remove the pillows by pulling on them!
The pillows utilize a bolt-on design that prohibits removal without
tools.
To remove pillows:
1. Grasp center pillow insert (A)
with finger tips and gently pry
outward from pillow base (C).
2. Use a standard screwdriver to
loosen and remove mounting
bolts (B) from pillow base.
3. Assemble in reverse order after
cleaning.
DO NOT overtighten
pillow mounting bolts!
Page 30
