46
Maintenance
■
Remove the screw and cover (be careful not to release the clip of the inside flap).
■
Clean the nozzle compartment with a strong jet of water and liquid soap, if required. Be
careful to clean the seal of the hatch and the valve on the bottom.
■
Then refit the cover making sure that the o-ring is inserted well in its housing.
1
4
3
1
2
■
Remove the flange cover (1) by levering under the edge with a wide flat tipped screw-
driver.
■
Remove the ring (3) and the nozzle (4) by releasing the tabs.
■
Remove residues and wash the various components with water and liquid soap. The
nozzle can be removed: be careful not to loose the clip inside.
■
Repeat the procedure in the reverse order and make sure that the ring (3) is fastened
well.
Suction nozzles
Hydromassage nozzles
W
e always recommend carefully reading the manual; in the instance that there is an issue,
refer to the following guide.
Summary of Contents for hydromassage
Page 26: ...26 Thenewshape ofwell being ...
