103/127
c.
Tighten the locknut.
d.
Check if the throttle lever is working perfectly.
e.
Reinstall the air filter cap.
Reduce
gap
Increase
gap
GAP:
0.5-2.5 mm
Locknut
Adjusting nut
7.6. Checking the pump oil
To check the pump oil quality and level, follow the steps below:
1.
Remove the cushion
2.
Check if the pump oil is contaminated or has a milky appearance.
3.
Check if the oil level is below the average level on the oil inspection window. If any of these situations are noticed, contact your
authorized technical assistance.
7.7. Checking the nozzle
Check if the spray nozzle is spraying continuously. In case it is not, take the nozzle apart and clean it. To clean it, follow the steps below:
•
Clean the nozzle to remove any dirt or clogging.
•
Replace the nozzle if it is damaged.
Average level
Pump oil
inspection
window
Summary of Contents for pjm-20
Page 128: ......
