30
Change the oil of the pump and gearbox .........................
Tighten the belts ..............................................................
Clean and check the pressure regulator components ....
Clean the inside and outside of the sprayer, and paint the
parts subject to corrosion with lubricating oil ...................
X
X
X
X
Sprayer type
Stage
Procedure
Trailer
3 point
OPERATIONAL PROCEDURES
Check if all components are intact ..................................
Check the components of accessories box ....................
Require trained person to instruct about assembling,
operating and servicing components and accessories ...
Check if the hitch pin is original .......................................
Check if the three-point hitch pins are original .................
Check if the hitch pins have cotter pins ...........................
Check the overlaps of the PTO shaft ..............................
Remove the tractor's drawbar .........................................
Raise to the highest the tractor's hydraulic arms ............
Adjust the control valve position to avoid impacts while
turning .............................................................................
Check if the grease fittings are filled ................................
Check if the oil is on the level on the components ...........
Calibrate the tires ............................................................
Retighten the tank nuts and lug nuts ...............................
Whenever filling
the tank
Clean the suction or line filters ........................................
Clean nozzles and their strainers ....................................
Change for the first time the pump oil ..............................
Retighten the bolts on the tank, axle and wheels..............
Receiving the
sprayer
Using the sprayer
for the first time
Every day or
every 10 hours
First 30 hours
Every 100 hours
X
X
X
X
X
X
X
-
X
X
-
X
X
X
X
X
X
-
X
X
X
X
X
-
X
X
-
-
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
-
X
X
X
X
Spraying
Use individual protective clothing .....................................
Do not work at high speeds .............................................
Do not spray against the wind .........................................
Do not travel with boom lifted or unlocked .......................
Take care with electricity supply cables ..........................
Do not eat, drink or smoke while spraying .......................
After spraying, dispose of all protective clothing and take a
shower ............................................................................
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Clean nozzles, strainers and filters .................................
Check the grease fittings and joint pins ...........................
Check the oil level on the pumps and gear box ...............
Wash the inside and outside of the sprayer ....................
Check for damage on the paint and repaint .....................
Check for oil leakage and stop it ......................................
Store the sprayer in a dry, ventilated and indoor place ....
Service the pump ............................................................
Change hydraulic oil ........................................................
Change the oil of the gearbox ..........................................
Retighten the bolts of tank, wheels, axle, etc. .................
Change the grease of the wheel hub ...............................
Every 500 hours
or annually
X
X
X
X
X
X
-
X
-
-
