APPENDIX B
– Direct Wall Mounting Option
In the case of installation whereby the installer has opted not to use wall mounting plates, the
following diagram provides details for positioning mounting studs and cut-out regions for cable entry.
Jacques suggests using M4 pan head screws or similar solutions for acting as mounting studs. The
head of the mounting stud should ideally be between 8 - 9mm in width and separated from the wall by
approximately 4mm. Please ensure that the item used is designed specifically for fastening to wall
material present at the installation site. Jacques does not take any responsibility for damages
occurred as a result of the
installer’s selection of mounting hardware.
