www
|
jacques.com.au
Document Number
|
JED-0492
Revision
|
1.0
Page 6 of 18
OVERVIEW
Figure 2: JIB-4000 Front View
The JIB-4000 product features a RJ45 port, LED indicators and a micro USB port on their front panel.
See below table for further description.
FRONT CONNECTIONS
LAN + PoE
RJ45 port for Data and Power
DIAG
Micro USB port intended for factory programming purposes
LED INDICATORS
PWR
When lit, indicates the devices internal power rails (5 V d.c. and 12 V d.c.) are
operational.
STAT
Indicates the devices current operational status / mode.
Typical modes:
Green: Call connected
Green Flashing: Server disconnected
Red:
Device is operating in ‘Recovery Mode’
LINK
When lit, indicates ethernet link is detected
ACT
When lit, indicates ethernet data (TX / RX) activity
S1
N/A
S2
N/A
S3
When lit, indicates Relay 1 is activated
S4
When lit, indicates Relay 2 is activated
LINK
ACT
