4 SET-UP
12
4.8
FRONT MOWERS__________________________________________________________
1.
Remove the left and right mower assemblies from the
shipping crates. Remove hardware (
H
) and pull lift
arm (
J
) from each cutting unit.
2.
Assemble lift arms (
J
) to the
a.
Remove nut and bolt (
K
) then remove pin (
L
).
b.
Place lift arm (
J
) in cradle and slide pin (
L
)
through the cradle and lift arm. Secure pin with
hardware (
K
).
c.
Assemble shackles (
N
) to the chains, then
assemble each chain to crank (
M
) and secure
with pins (
P
).
d.
Assemble free end of chain to lift arm (
J
) and
secure with pins (
P
).
e.
Repeat steps a-d for the other side.
DO NOT assemble Down Pressure Springs. They will
be installed in Section 4.12.
3.
Assemble the front mowers to the lift arms with
hardware (
H
).
4.
Remove the cover plate (
S
) from the drive end of
each mower. Retain hardware (
U
) and gasket (
R
).
Store cover plate (
S
) for future use.
5.
Install motors on mowers with hardware (
U
) and
gasket (
R
). Nut (
T
) must be facing upwards as
shown.
Figure 4E
Figure 4F
Figure 4G
Figure 4H
H
J
J
K
K
L
M
N
P
J
R
S
T
U
