background image

June 2011© 

Jacobsen HR6010 ROPS Operator Manual

 

 

Safety Precautions 

 

Safety First 

 

Read these instructions carefully. It is essential that you read the instructions and safety 

regulations before you attempt to assemble or use the features that are on this cab/ROPS. 

 

Danger: 

Indicates an immediate hazardous situation which, if not avoided, will result in death 

or serious injury. 

 

Warning: 

Indicates a potentially hazardous situation which, if not avoided, may result in death 

or serious injury. 

 

Caution: 

Indicates a potentially hazardous situation which, if not avoided, may result in minor 

or moderate injury. 

 

Important: 

Indicates that cab or property damage may result if instructions are not carefully 

followed. 

 

NOTE: 

All products are designed to give safe, dependable service if they are operated and 

maintained according to instructions. It is the owner’s responsibility to be certain anyone 

operating this product reads this manual, and all other applicable manuals, to become familiar 

with this cab and all safety precautions. Failure to do so could result in serious personal injury 

or cab damage. If you have any questions, consult your dealer.  Read and understand this 

manual before operation. 

 

NOTE: 

A safe operator is the best assurance against accidents. All operators, no matter how 

experienced they may be, should read this operator manual and all other related  manuals 

before attempting to operate features in this cab/ROPS and operate the base tractor. Please 

read the following section and pay  particular attention to all safety recommendations 

contained in this manual and those labelled on the cab and on the tractor. 

 

 

 

Summary of Contents for Ransomes HR 6010











Reviews: