Jacobsen PGM 22 Technical Manual Download Page 2

Page: 2 / 78

right to reproduce this material or portions thereof in any form.”

To Order Parts

1. Write your

full

name and

complete

address on the

order.

2. Explain where and how to make shipment.
3. Give product number, name and serial number that is

stamped on the name plate or serial plate of your prod-
uct.

4. Order by the quantity desired, the part number, paint

code, and description of the part as given in the parts

list.

5. Send or bring the order to an authorized Jacobsen.
6. Inspect all shipments on receipt. If any parts are dam-

aged or missing, file a claim with the carrier before
accepting.

7. Do not return material without a letter of explanation,

listing the parts being returned. Transportation charges
must be prepaid.

Use of other than authorized parts will void the warranty.

This manual is designed for the Maintenance and Adjustment of this equipment.

Use the maintenance and adjustment instructions included in this manual and the operating
instructions included in the

Safety and Operation Manual

to service the machine.

The

Safety and Operation Manual

must be kept available for reference by the operator.

Table of Contents

Safety

1.1

Operating Safety.................................................. 4

1.2

Important Safety Notes ........................................ 5

Specifications

2.1

Product Identification ........................................... 6

2.2

Engine .................................................................. 6

2.3

Mower .................................................................. 6

2.4

Traction and Differential ....................................... 6

2.5

Weight .................................................................. 7

2.6

Accessories ......................................................... 7

Decals

3.1

Decals.................................................................. 8

Initial Inspection

4.1

General ................................................................ 9

4.2

Initial inspection ................................................... 9

Controls

5.1

Icons .................................................................. 10

5.2

Controls ............................................................. 10

Operation

6.1

Daily Inspection ................................................. 12

6.2

Operator Presence Control ................................ 12

6.3

Operating Procedures ........................................ 13

6.4

Starting/Stopping Engine ................................... 14

6.5

Transport Wheels (Optional Kit 62293) ............. 15

6.6

Grass Catcher .................................................... 15

6.7

Mowing .............................................................. 16

6.8

Daily Maintenance ............................................. 17

Adjustments

7.1

General............................................................... 18

7.2

Reel To Bedknife ................................................18

7.3

Bedknife .............................................................19

7.4

Brake ..................................................................19

7.5

Cutting Height .....................................................20

7.6

Handle ................................................................20

7.7

Torque Specification ...........................................21

Maintenance

8.1

General............................................................... 22

8.2

Engine ................................................................22

8.3

Engine Oil ...........................................................23

8.4

Fuel ....................................................................23

8.5

Bedknife Shoe Removal .....................................24

8.6

Backlapping And Grinding ..................................24

8.7

Transport Tires (Option) .....................................24

8.8

Wheel Bearing ....................................................25

8.9

Storage ...............................................................25

8.10 Troubleshooting ..................................................26
8.11 Lubrication ..........................................................27
8.12 Maintenance Chart .............................................27

Notes

Parts Catalog

10.1 Table of Contents ............................................... 29

LITHO IN U.S.A. 4-2006

Summary of Contents for PGM 22















































































Search results

Summary of Contents for PGM 22

Reviews:

Related manuals for PGM 22

Brands by name

Popular brands

Jacobsen PGM 22, Technical Manual

Search results

Summary of Contents for PGM 22

Reviews:

Related manuals for PGM 22

Brands by name

Popular brands