Jacobsen G-Plex III, Safety And Operators Manual

Page: 33 / 76

GB-31
GB
JACOBSEN G-PLEX III Series: DN & DP
SAFETY AND OPERATORS MANUAL
10.10 BATTERY
The factory installed battery is "Low Maintenance."
Add liquid only as required.
NOTE: Keep top of battery clean and free of
corrosion by washing with a solution of
baking soda and water OR ammonia
and water. Rinse with clean water.
Batteries with heavy corrosion should
be removed and cleaned with solution.
Battery cables should be disconnected before using
a "Fast Charger.
UNTRAINED / UNAUTHORIZED persons
should NEVER attempt to service or
recharge the battery in this machine.
Battery electrolyte is an acidic solution
and should be handled with care. If
electrolyte is splashed on any part of the
body, imediately flush the exposed area
with liberal amounts of water and obtain
medical aid immediately.
WARNING
DO NOT allow flames or sparks near the
battery when connecting for jump starting
or charging.
Hydrogen gas is produced during the
charging process and can be explosive.
Provide adequate ventilation to prevent
possible explosion.
WARNING
10 LUBRICATION & MAINTENANCE