Jacobsen Eclipse 322 62800, Technical/Repair Manual

Page: 61 / 82

GENSET AND BATTERY PACK
4271491-Second Edition 3-25
3
Figure 3-36
13. Tag and disconnect rectifier connector (11).
14. Cut cable tie (12).
15. Remove fan relay (13).
16. Remove screw (14) and fan relay base (15).
17. Remove GCU. (See “GCU” on page 4-155.)
Figure 3-37
18. Tag and disconnect genset connector (18) and
genset fan connector (17).
19. Cut cable tie (16).
20. Move the wiring harness away from the genset.
Figure 3-38
21. Tag and disconnect engine harness-to-main harness
connectors (19 and 20).
Figure 3-39
22. Turn the fuel outlet hose shutoff valve clockwise until
valve bottoms lightly. Valve is located on the bottom
of the fuel tank.
23. Remove fuel tank. (See “Fuel Tank (Diesel Models)”
on page 3-20.)
24. Remove fuel filter. (See “Fuel Filter (Diesel Models)”
on page 3-22.)
25. Remove four screws (22) and nuts (23), and remove
fuel tank bracket (21).
26. Remove four screws (24) and flat washers (25), and
remove rear controller cover (26).
27. Remove muffler and exhaust assembly. (See “Muffler
(Diesel Models)” on page 3-15.)
TN2713
14
13
11
15
12
TN2754
18
16
17
TN4573
19
20
TN2707
26
21
25 24
22 23