Pre-Delivery Checklist
Product No. 67827/67828 – LF-3810 Fairway Mower
Product No.
_____________________
Serial No.
______________________
Tractor —————————————————
Check:
❏
Wheel lug torque:
❏
Front 80 - 100 ft. lb.
❏
Rear 40 - 45 ft. lb.
❏
Tire pressure should be:
❏
Front 10-12 psi (69-83 kPa)
❏
Rear 8-10 psi (55-69 kPa)
❏
Hydro linkage neutral centering adjustment (unit must not
creep in neutral)
❏
Traction pedal stop adjustment
❏
Parking brake adjustment
Engine —————————————————
Check:
❏
Engine oil level
❏
Engine coolant level
❏
Air cleaner element and connections
❏
Belt adjustments
Electrical System ————————————
Check:
❏
Interlock switch function
❏
Neutral start switch
❏
Parking brake switch
❏
Mower PTO switch
❏
Mower limit switch
❏
Seat switch / Time delay relay
❏
Operation of all function control switches
❏
4WD cut-out switch (4WD only)
❏
Function of crosscut feature
❏
Dash panel gauges and warning lights
❏
For pinched or rubbing wires
Hydraulic System————————————
Check:
❏
Hydraulic oil level
❏
For pinched or rubbing hoses
❏
For twisted or crimped hoses
❏
For oil leaks
❏
Hydro tow valve is in ‘Drive’ position
❏
Backlap valves are fully closed
❏
Determine GreenSentry™ is operational
Cutting Units ——————————————
Check:
❏
Bedknife screws for tightness
❏
Reel for end play; there should be no free end play
❏
Roller bearing adjustment
❏
Reel drive belts adjustment
❏
All hardware properly tightened
❏
Adjust reel weight springs to give equal weight to all cutting
units. Caution: Check maximum safe exposed thread
length in the Parts & Maintenance Manual before making
this adjustment.
❏
Reel to bedknife clearance, .001” to .003” (.025 - .08 mm).
❏
Adjust cutting height to customers’ specs. (.025 - .08 mm)
Miscellaneous —————————————
❏
Check for loose or missing hardware
❏
All lubrication points
❏
Examine paint finish; touch up where necessary
❏
Check decals. In place and legible
❏
Make sure Manuals are in the pouch
❏
______________________________________________
❏
______________________________________________
Should you encounter any areas that required repair during set-up, please explain below and fax (414/635-1067) a copy of the
checklist and problem description to use.
Problem Description ______________________________________________________________________________________
________________________________________________________________________________________________________
________________________________________________________________________________________________________
________________________________________________________________________________________________________
Dealer ____________________________________________
Inspected by _______________________________________
Customer ____________________________________________
Date _____________________________________________
Summary of Contents for 67827
Page 28: ......
