Jacobsen 63300 Technical Manual Download

Page: 14 / 144

4 CONTROLS

Superintendent Mode

is used by the superintendent to

set and adjust all functional values for the Eclipse Mower.
LCD displays available in Superintendent Mode are,
factory reset, system voltage, travel speed, reel speed,
total hours on machine, traction motor current draw, reel
motor current draw, total motor current draw, set mow
speed, maintenance hours, set reel speed, set display
units, calibrate speed paddle and calibrate bail lever.

To enter Superintendent Mode, press both orange
buttons

(K and L)

when Jacobsen Version X.XX is on the

display. Use the orange buttons

(K or L)

to select and the

black button

(J)

to enter the digits for the Mechanic Mode

pin.

NOTE:

The PIN for Superintendent Mode is

6789

For backlap screens, see

Section 11.4

Factory Reset:

To reset controller to factory default

values, press either of the orange buttons

(K or L)

on the

front cover until the Factory Reset screen is on the LCD
display. Press the black button

(J)

to reset values back to

factory default settings

Maximum Mow Speed3.4 Mph (5.5 kph)
Reel Speed ................2200 rpm
Fixed FOC Setting ..... 0.146
Display units ..............English

Fixed FOC Setting:

To set the fixed FOC, press either of

the orange buttons

(K or L)

on the front cover until the

FOC x.xxx CHANGE? screen is on the LCD display.
Press the black button

(J)

to enter set mode. Use the

orange buttons to raise

(K)

or lower

(L)

the FOC value to

the desired setting. press the black button to set speed.

Fixed FOC setting must be 0 or between 0.087 and 0.178
in. (2.2 and 4.5 mm)

See Section 4.4

Maximum Mow Speed:

To set the maximum mow

speed, press either of the orange buttons

(K or L)

on the

front cover until the set max mow speed screen is on the
LCD display. Press the black button

(J)

to enter set

mode. Use the orange buttons to raise

(K)

or lower

(L)

the maximum mow speed to the desired speed. press the
black button to set speed.

Maximum mow speed must be between 2.0 and 3.4
MPH (3.2 and 5.5 kph).

Fixed Reel Speed:

To set the fixed reel speed, the FOC

setting must be set to 0, then press either of the orange
buttons

(K or L)

on the front cover until the set reel speed

screen is on the LCD display. Press the black button

(J)

to enter set mode. Use the orange buttons to raise

(K)

lower

(L)

the reel speed to the desired setting.

Fixed reel speed must be set between 1800 and
2200 rpm.

The Maximum Mow Speed and the Fixed Reel Speed are
used to determine the FOC (Frequency of Cut)

See

Section 4.4

Maintenance Hours:

To reset maintenance hours, press

either of the orange buttons

(K or L)

on the front cover

until the maintenance hours screen is on the LCD
display. Press the black button

(J)

to reset maintenance

hours to zero. The system can track a maximum of 999.9
hours.

Motor Type Select:

Select the part number for the reel

and traction motors used on your equipment. The two
motors have different control voltage to output RPM
characteristics. The eclipse mower only uses motor part
no. 4160533.

Figure 4E

Display Units

: To set the display units, press either of

the orange buttons

(K or L)

on the front cover until the

units screen is on the LCD display. Press the black
button

(J)

to enter set mode. Use the orange buttons to

select the desired setting.

Units must be set to English or metric.

Calibrate Speed Paddle