ADJUSTMENTS 9
41
9.13 PARKING BRAKE__________________________________________________________
Disengage brake lever and measure the distance
between nut
(AB)
and bottom of pivot. Adjust nut so the
distance is 3/16 in. (5 mm).
Figure 9N
9.14 INTERLOCK SWITCHES ____________________________________________________
1.
Refer to the Interlock System check in your
Safety
& Operation
manual. If the system
fails
any
test
listed, adjustment or replacement of the switches or
levers is required.
2.
Remove the front cowling and check the control
linkages to be sure they are properly adjusted
and
.
3.
Check switches to make sure they are working
properly.
9.15 REEL SWITCHES __________________________________________________________
The reel lever linkage actuates two electrical switches
located under the levers. Check that both switches are
closed when all reel levers are in their Neutral position.
1.
Check and make sure switches are wired correctly.
Refer to
and labels attached to wires for
correct terminal placement.
2.
When any of the reel levers are moved to the
Forward position, Reel Switch (Wires A and B)
should open and Backlap Switch (Wires C and D)
should remain closed.
3.
When any of the reel levers are moved to the
Reverse position, Backlap Switch (Wires C and D)
should open and Reel Switch (Wires A and B)
should remain closed.
Figure 9O
3/16 in.
GKV-13
AB
(5 mm)
CAUTION
Never operate equipment with damaged switches.
Replace faulty switches immediately.
!
A
B
C
D
Reel Switch
Backlap Switch
