Jacobsen 10029194, Safety, Operation & Maintenance Manual

Page: 130 / 148

B
en-130
Safety, Operation, & Maintenance Manual
LDU ERROR CODES
Lithium
Execution Time High CAN:
The average execution time was
higher than 1000U us.
Internal Error:
Most likely a static configuration
error was not caught at compile time
including the following
- Impossible configuration in flash
memory
- Illegal error bit configured for an
event.
- Same event id on two different
events.
This can also be set by various state
machines when an unknown state is
encountered.
Clock Failure:
Either the external crystal or internal
PLL failed to generate a stable clock.
The CPU will be clocked by the
internal 8MHz RC oscillator.
15V Out of Range:
The internal 15V supply is out of
range. The valid range is 10.56V to
19.0V.
3V3 Low:
The internal 3.3V supply is too low.
The limit is 2.9V.
CPU Test:
The startup test of the CPU failed.
Watchdog:
The startup test of the watchdog
failed.
64MHz HSI:
The startup test of the 64MHz HSI
failed.
LDU Error Code Description
Caution
LED
Alarm
Sound -
ing
Engine
Stop
Traction
Stop
Mow Stop
On Off Yes No Yes No Yes No Yes No
STEERING
FAULT F058
STEERING
FAULT F059
STEERING
FAULT F05A
STEERING
FAULT F061
STEERING
FAULT F062
STEERING
FAULT F080
STEERING
FAULT F081
STEERING
FAULT F082