16
English
2. Install the plaster guard
• Install the plaster guard.
• Push until the plaster guard is snug against the face of the elbow (or tee)
3. Set the pipe depth
NOTE
: Thin wall installations have a finished wall thickness of less
than 1/2″ (1.3 cm).
• To adjust the pipe depth, use a level or other straight edge to line up the ″Thin Wall
Installation″ mark with the front face of the studs.
Thin wall installation
Elbow (or Tee)
Plaster guard
Align mark with the front of
the stud face.
All installations
• Temporarily install a nipple to each tee/elbow. Do not use any sealant.
• Do not strap the pipes at this time.
Summary of Contents for E8013
