18
5
– JACO Power Inverter Reset steps.
Unplug the JACO Cart power cord from the wall outlet.
Remove the Base Shroud to expose the Lithium Iron Phosphate battery packs.
Depending on the model of JACO Mobile Cart that you have, you will need either a
blade screwdriver or a Phillips screwdriver. To remove the Shroud, turn the hardware
¼ turn counterclockwise until the fastener snaps out.
Unplug the batteries from the connector board as shown below. Depending on the
battery system that was ordered, you may only have one battery. Wait for about one
full minute before reconnecting.
Plug the JACO Mobile Cart power cord into a known good AC wall outlet.
- Does the front status LEDs panel turn on?
- Does the JACO Power Inverter fan turn on?
- Does the PC and LCD power on?
If yes to all above, no need to continue. If not, go to next step.
6
– Check the battery fuse located on each battery pack as shown below.
Remove the fuse and review for possible break. You will be able to see if the internal
connection is still in place or if it has disconnected. If you have a dual battery system, check
both fuses.
