12
Default combination and instruction to open the optional Push Button Drawer
– First turn the knob to
the left to clear the lock then press #2 and #4 buttons at the same time then press the #3 button. Next
turn the knob to the right and holding the knob in this position, pull the drawer open. The combination
can be changed, follow the instruction sheet provided with the Cart.
Default combination and instruction to open the Touch Pad e-locking Drawer
– Use the default
combination 4, 1, 2, 3, then press the Unlock Button, pull the drawer open. This combination can be
changed as needed and offers up to 64 unique 4 digit access codes. To change the pass code, press the
numbers 3, 1, 2 then the unlock button, you will hear a "beep" indicating that a new 4 digit code can be
entered. If you enter an unacceptable code, such as 1, 1, 1, 1, you will hear a "buzz" noise indicating the
code is not changed. When entering an acceptable new code, you will hear two short "beeps" indicating
that the code is now changed.
If for some reason the electronic pass code system were to fail, there is a rescue key lock located at the
back of the drawer system as shown below. Insert, turn and hold key in the unlocked position to allow
the drawers to be opened when by-passing the electronic drawer lock system. The by-pass key is not the
same key used to access the Top Assembly. The rescue keys are included in the Cart accessory kit which is
placed inside the Mobile Cart Top Assembly housing.
Rescue key access on back of drawer/cabinet assembly
NOTE:
See page 5 of this manual for important safety information regarding the drawer option.
