DETAIL OF THE CJ-20 DATA PLATE
2
1 PH 60Hz 2 WIRE
SERIAL NO.:
MODEL:
ELECTRICAL RATINGS
WASH MOTOR
1 HP
3.2 A
208 VOLTS
230 VOLTS
3.2 A
WASH HEATER
2.5 KW
12.0 A
13.2 A
RINSE HEATER
6 KW
28.8 A
31.7 A
TOTAL AMP LOAD
44.1 A
48.2 A
OPERATING PARAMETERS
FLOW PRESSURE
20 PSI
INCOMING WATER TEMPERATURE (MINIMUM)
140°F
WASH TEMPERATURE (MINIMUM)
150°F
RINSE TEMPERATURE (MINIMUM)
180°F
WASH TIME
105 SEC
RINSE TIME
15 SEC
DRAIN PUMP MOTOR 1/20HP
0.1 A
0.1 A
3 KW
7.3 KW
MANUFACTURER’S LOGO
MODEL DESIGNATION
(I.E. “CJ-20”)
AMPERAGE LOAD
INFORMATION
MINIMUM OPERATING
PARAMETERS (SEE NOTE #1)
MANUFACTURER’S
ADDRESS INFORMATION
DO NOT USE THE ABOVE DATA PLATE TO REPRESENT YOUR DISHMACHINE. THE DATA PLATE ABOVE IS A GENERIC
REPRESENTATION USED ONLY TO SHOW YOU WHERE TO LOCATE INFORMATION. Under no circumstance should the data
plate be removed from the unit. The data plate is essential in identifying the particular characteristics of your machine and
is of great benefit to installers, operators, and maintenance personnel. It is recommended that you copy down the essential
information on the final page in this manual for reference before installation.
CE LOGO (SEE NOTE #2)
NSF LOGO (SEE NOTE #3)
UL LOGO (SEE NOTE #4)
