manualshive.com logo in svg

Jackson AJX SERIES, Installation, Operation And Service Manual, Page: 29 / 102

Share
Download
Jackson AJX SERIES Installation, Operation And Service Manual Download Page 29

07610-003-60-98-L

21

INSTALLATION

INSTRUCTIONS

Before installing the machine, check the packaging and machine for damage.  Damaged 
packaging indicates possible damage to the product. If there is any type of damage to both 

the packaging and machine, DO NOT THROW AWAY THE PACKAGING. The machine 

has been inspected at the factory and is expected to arrive in new, undamaged condition. 
However, rough handling by carriers or others might result in damage to the machine while 
in transit. If this occurs, DO NOT RETURN THE MACHINE TO THE MANUFACTURER. 
Instead, contact the carrier and ask them to send a representative to the site to inspect the 
damage and complete an inspection report. You must contact the carrier and the dealer that 

sold you the machine within 48 hours of receiving the machine.

 

The machine should be unpacked and removed from the pallet before installing. 
Remove the wooden lift beams and their associated brackets after the machine has 
been positioned. Open the front door and remove all materials from inside. Once 
unpacked, verify there are no missing parts. If a part is missing, contact the manufacturer 
immediately.

The machine is designed to operate while level. This is important to prevent any damage 
to the machine during operation and to ensure the best results. The machine comes 
equipped with adjustable bullet feet, which can be turned using a pair of pliers. Verify 
the machine is level from front-to-back and side-to-side before making any electrical or 
plumbing connections.  

The manufacturer does NOT endorse "Tankless On-demand" water heaters for use with 

their machines.  The manufacturer DOES endorse, and highly recommends, the standard 

"Tank" style water heaters, sized to properly handle the water heating requirements of the 

facility.

INSPECTION

LEVELING

UNPACKING 

Do not throw away 

the packaging if 

damage is evident!

FACILITY HOT 

WATER HEATER

x4

Summary of Contents for AJX SERIES







































































































Reviews:

No comments