5.
Install 1-1/2” tee to 1-1/2” close nipple installed on step 4 as shown in picture below.
Make sure middle opening on the tee is parallel with bottom of wash tank.
6.
Install solenoid assembly 05700-004-14-95 (shown below) to middle opening of the
tee. Refer to photo below. (Solenoid coil may need to be removed before attaching
assembly to tee.)
7.
Connect the drain discharge piping (not supplied by Jackson) to the 1-1/2” tee (index
#1). Refer to the picture below. A 1-1/2” street elbow has been supplied if needed to
make connection.
6
