8
Memorized Temperature Settings
Your unit has been designed to “remember” the last run mode to which it was set.
If there is a power outage or any other power cutoff, the unit will automatically
return to the previous temperature setting after the power has returned.
Compressor Run Indicator
When the unit’s compressor is running, the control panel will display a moving
icon representing a running fan. If the compressor stops running, the icon will stop
running as well.
About the Liquid Crystal Display (LCD)
When you press any button on the control panel, a backlight will appear in the
display. If no other button is pressed, the backlight will automatically go out after 2
minutes.
ALARM Mode
In the event that there is a fault in the unit, an ALARM indication will appear on the
screen.
In ALARM mode, the unit will make a beeping sound and display an alarm
message. If the LCD on the control panel displays any of the following messages:
PROBE ERROR, LOW TEMP or HIGH TEMP, consult the
Troubleshooting
section of this manual.
Interior Light
The interior light can be operated manually by pressing the ON/OFF button on the
control panel. The light will automatically turn off after 5 minutes.
NOTE:
Avoid overuse of the interior light since the heat generated can raise the
temperature of the stored contents.
Shelving
The wire racks in your unit are chrome-plated so they will not rust. The unit has 3
adjustable chrome-plated flat wire shelves and a wire basket to hold cans and
bottles of beverages such as beer, water and soft drinks.
The racks are removable and reversible. To remove a rack, take out the bottles on
the rack and pull it out until it stops. Then lift up the front of the rack and remove it
from the unit.
