12
LCD displays “PROBE ERROR”
This message is an ALARM MODE indication. The LCD displays “PROBE
ERROR” on the left when the thermostatic sensor has malfunctioned. Contact
your authorized service facility for sensor replacement.
LCD displays “LOW TEMP”
This message is an ALARM MODE indication. The LCD displays “LOW TEMP”
on the left and “L” in the middle. It indicates that the actual temperature is much
lower than your set temperature.
LCD displays “HIGH TEMP”
This message is an ALARM MODE indication. The LCD displays “HIGH TEMP”
on the left and the actual temperature reading in the middle. It indicates that the
actual temperature is much higher than your set temperature. Possible causes
are:
•
The door might not be fully closed.
•
The refrigerant may have leaked.
•
The heater may not be functioning properly and should be replaced.
If you are certain that the door is not the cause of the problem, contact your
authorized service facility immediately.
