background image

 

 

Propane Gas Connection: 

 

 

 

Fuel Source:

 The following instructions are for a Propane Equipped grill ONLY.

 

 

 

Hose & Regulator:

 Use only the propane hose and regulator supplied with your Propane grill. 

   

 

 

 

Installation Codes: 

The installation of this appliance must conform with local codes or, in the absence of local 

codes, to the National Fuel Gas Code, ANSI Z223. 1 or CAN/CGA-B149.2 Propane Installation Code.

 

 

 

Propane Cylinder Requirements & Specifications: 

 

1.  Maximum Cylinder Size: 20 lbs. (9 Kg) 
2.  Measurement: (approximately)      Diameter: 12

’’(30.5cm)    X    Height: 18” (45.7cm):   

3.  USA: All LP cylinders used with this grill must be constructed and marked in accordance with the 

Specifications for LP (Propane) Gas Cylinders

 of the US Department of Transportation (D.O.T.). Refer to your 

propane cylinder collar for markings. 

4.  CANADA: All propane cylinders used with this grill must be constructed and marked in accordance with the 

National Standard of Canada, CAN/CSA-B339; 

Cylinders, Spheres and Tubes for the Transportation of 

Dangerous Goods and Commission.

 Refer to your propane cylinder collar for markings. 

5.  Cylinder supply system must be arranged for vapor withdrawal. 
6.  Cylinder must be equipped with a collar to protect the outlet valve.   
7.  Cylinders must be rust and dent free: a dented or rusty propane cylinder may be hazardous, and must be 

professionally inspected before use. 

8.  Cylinders must be equipped with QCC Type 1 (Quick Closing Coupling) outlet, compatible with the regulator 

supplied. 

9.  Propane Cylinders must be equipped with a safety relief valve. 
10.  UL listed Overfill Protection Device (OPD); This OPD safety feature is identified by a unique triangular hand 

wheel. 

Only use cylinders equipped with this type of valve. (Fig. 8)

 

 

 
 
 
 
 
 
 
 
 

 

 

Propane Cylinder Handling: 

 

1.  Government regulations prohibit shipping full Propane cylinders. You must take your new cylinder to a 

Propane filling station for filling. 

2.  A full cylinder is under high pressure; always handle with care, and transport secured and in an upright 

position. Protect the valve from accidental damage. 

3.  Do not tip the propane cy

linder while connecting it to your grill’s regulator 

4.  If the cylinder is tipped over while connected to your grill, shut it off and disconnect it; then have it checked 

before use. 
 

 

Propane Cylinder Storage: 

 

1.  Disconnected propane cylinders must have a dust cap installed for storage purposes. 
2.  Store all propane cylinders outdoors in a well-ventilated area. 
3.  Do not store cylinders in direct sunlight or near a source of heat or combustion.   
4.  Propane cylinders must be REMOVED from your grill; when the grill is to be stored indoors. 
5.  Keep all propane tanks out of reach of children. 

6. 

If your grill is stored outside, the propane tank may be left connected to the grill. Turn off propane tank valve 
when grill is not in use.

 

 
 

Figure 8 

Summary of Contents for PREMIER 850BI-2























Reviews: