8
Installation:
A.
Installing in an outdoor cabinet:
This grill must be safely and correctly installed as a built in, before using. Please refer to the chart below, for correct
installation dimensions.
Framing must enclose the grill on the back and sides, but the bottom of the cut-out may be left open. The grill is
supported by the three integral flanges (left, right and rear), so no support underneath is required. NOTE: please
ensure that fuel line openings provide adequate space so that lines are not rubbing abrasive edges.
CABINET FRAMING DIMENSIONS:
Installation in NON-COMBUSTIBLE Cabinets
A
Width
39 1/2
”
99.7 cm
B
Depth (Front to Rear)
18 1/2
”
45.8 cm
C
Height (Top to Bottom)
10 1/4
”
25.5 cm
D
Minimum Total Cabinet Depth
24
”
61 cm
E
Rear Clearance to Cabinet
Vertical*
5 ½”
14 cm
F
Bottom Clearance to Accessory
Doors
3”
7.7 cm
Example of an Installation in
Non-Combustible materials:
cement board and metal studs.
(Grill raised for illustration
purposes).
Figure 7
