ROTISSERIE BURNER CONVERSION
1. Using a # 2 Phillips screwdriver, undo the 4 screws that hold the back cover plate to the inner hood.
2. Once the cover h as been removed use a 9 mm wrenc h to remove the rear burner orifice from the
rear burner. Pla ce the prop ane rear burner orifice with the main burn er propane orifices you
removed previously.
3. Install the new rear burner orifice using the wrench.
4. Reinstall the rear burner cover plate using the 4 screws previously removed.
NOTE:
There is NO air adjustment required when converting the rear bu rner from Prop ane Gas to
Natural Gas.
Remove the 3/8” flare fitting that attaches the prop ane hose from t he Manifold block inside of the
pedestal and replace it with an approved 10’ Natural Gas neoprene hose.
REMEMBER TO LEAK CHECK ALL FITTINGS AND ORIFICES AFTER ALL OF THE CONVERSION
IS COMPLETED, LEAK CHECK A LL FITTINGS AND TEST FIRE ALL BURNERS TO ENSURE
PROPER, SAFE OPERATION.
12
Summary of Contents for LUX Built In Series
Page 6: ...6 EXPLODED VIEW PARTS LIST...
