background image

Tools Required for Assembly: 

 
 

Please use the proper tools to simplify installation and prevent injury or damage to your grill. 

 

 

 

 

Installer Supplied Tools:

 

 

 

Large Phillips Screwdriver 

Medium Phillips Screwdriver 

OPTIONAL: Socket wrench with 6mm   
Socket and extension 

 
 

 

Assembling & Preparing your Grill: 

 

 
 
 

 

CHECK BURNER FIT on ORIFICES: 

 

1.  Inspect burners to ensure that they are all inserted correctly onto 

the orifices (AKA the outlet of the valves; Fig 1) 

2.  If any burner is NOT correctly installed over the valve as shown in Fig 1, 

remove the burner retaining clip, remove the burner, and reinstall correctly. 

 
 
 

 

INSTALL FLAME DIFFUSERS & COOK GRIDS: 

 

1.  Remove the flame diffusers, grids & warming rack from the packaging. 
2.  Install each diffuser directly above each burner by setting them into the   

slotted ledges, in the front and rear of the firebox. (Fig. 2) 

3.  Once the flame diffusers have been installed, set the cooking grids on the   

upper ledges of the firebox in the grill, with the grill bars oriented front to rear. 

4.  Install the warming rack above cook grids, on the 2 brackets located on   

the left & right inner walls of the inner hood. 

 
 
 

 

PREPARE REAR BURNER IGNITER:   

 

1.  Unscrew the plastic/rubber cap from the rear burner ignition module, and insert 

AAA battery (supplied) with the positive end facing out. (Fig. 3) 

2.  Re-install cap. 

 

 

 

INSTALL ROTISSERIE KIT: (For Rotisserie Cooking) 

 

1.  Carefully remove the rotisserie kit parts from the packaging. 
2.  Install the motor mounting bracket supplied to the left hand side of the inner hood. (Fig. 4) 
3.  Install the motor on the motor bracket. 

Figure 1 

Figure 2 

Figure 3 

Tip of brass orifice, on 
end of valve; correctly 
hidden inside burner. 

Main burner   

Summary of Contents for LS700BI-LP

























Reviews: