background image

 

10 

 

 

Connecting Your Grill to a Propane Cylinder: 

1.  Make sure tank valve is in its full off position (turn clockwise to stop). 
2.  Check tank valve to ensure that is equipped with external (male) threads (i.e. QCC-1 type connecter). 
3.  Make sure all burner knobs are in their off position.   
4.  Remove the protective dust cap from the cylinder valve. Always reuse dust cap when storing a cylinder. 
5.  Inspect valve connection port and regulator; look for any damage or debris. Inspect hose for damage. Never 

attempt to use damaged or plugged cylinders. Contact your local propane gas dealer for repair. 

6.  When connecting the regulator to the valve, hand-tighten the black plastic Quick Coupling Connecter (QCC) 

nut clockwise to a positive stop. Do not use a wrench to tighten as this may damage the nut and cause leaks. 

7.  Open tank valve fully (counterclockwise). Use a soapy water solution to check all connections for leaks 

before attempting to light grill. If a leak is found, turn tank valve off and do not use grill until a local L.P. gas 
dealer can make repairs. 

 
 
 
 
 
 
 
 
 
 
 
 

 

Disconnecting a Propane Cylinder 
 

1.  Turn all the grill knobs to off. 
2.  Turn the tank valve off fully (turn clockwise to stop). 
3.  Detach the regulator from tank valve by turning the Quick Coupling Connecter (QCC) nut counterclockwise. 
4.  Install the protective cap back onto the threads of the propane cylinder valve. 

 
 

Natural Gas Connection: 

 
 

 

Fuel Source:

 The following instructions are for a Natural Gas Equipped grill ONLY.

 

 

 

NG Hose:

 Use only the natural gas hose supplied with your Propane grill. 

 

 

Install the Natural Gas Hose supplied, onto the nipple in at the RH wall of the grill cart. The nipple is located on 
the bottom of the fuel regulator, and it is a flare nut type connection; DO NOT USE SEALANT of any kind. 
Tighten using a ¾” open end wrench. 

 

 

Attach the supplied female quick release to the home owner’s new or existing Natural Gas Quick Release. This 
connection requires Gas Pipe Sealant, or Gas rated Teflon Tape. 

   

 

 

 

Next, double check to ensure that the source gas pressure is no more than 

7” water column.   

 
 
 
 
 
 
 
 
 
 
 
 
 

!WARNING! 

1 Never insert any foreign objects in valve outlet, as this may cause leaks. 
2 Do NOT connect this grill to unregulated Propane systems such as in a 
motor home or camper trailer. System pressure MUST be regulated before 
hook up. 
3 Do NOT use this grill until leak tests have been completed. 
4. If a gas leak is detected and cannot be stopped, call the fire department 
immediately. 

 

 

 

!WARNING! 

1 Never insert any foreign objects in the quick release or Natural Gas hose, 
as this may cause leaks. 

Source pressure for Natural Gas MUST be confirmed at 7” Water Column 

or less; using a grill at higher pressures could result in property damage, 
and injury or death. 
3 Do NOT use this grill until leak tests have been completed. 
4. If a gas leak is detected and cannot be stopped, call the fire department 
immediately. 

 

 

 

Summary of Contents for JPG850BI-2























Reviews: