5
Bend formed rails down
slightly (if necessary)
Figure 1
Figure 2
Figure 4
Figure 3a
Figure 3b
STEP 2
Drop the Searing Side Burner assembly onto the rails that formerly supported the
Cutting Board. This may be a tight fit; if so, please bend the rails down slightly using
a pair of pliers as needed (Fig. 1). This adjustment will allow the side burner to
drop into place.
.
STEP 3
Install the included Main Flex Fuel Line
onto the 3/8” flared connection on the Searing burner gas manifold (Fig. 2).
(NOTE: Sealant is NOT required). Next, insert the Main Flex Fuel Line through the hole in right pedestal wall of your
Jackson Grill. Note that the hole should be factory equipped with a grommet to protect the fuel line.
Remove the Brass Cap at the fuel manifold on your Jackson cart style grill (Fig.3a, 3b), then connect the Main Flex
Fuel Line as shown (Fig. 4).
