5
TECH TIP
It is recommend that a Certified Gas
Fitter be used to install fuel lines
and other fuel related components.
Figure 1
INSTALLATION INTO BUILT-IN CABINET *:
*NOTE: this side burner kit DOES NOT FIT Jackson Cart Model barbeques.
STEP 1
Cut hole in cabinet to size as shown: (Figure 1: J,K,L High-lighted in Yellow).
STEP 2
Install inlet fuel line
and connect to Side Burner at the 3/8” flared
connection under the side burner. (Sealant is not required at this
connection).
PROPANE
: Please ensure that the fuel source has been regulated so that the inlet press
ure is set at 11” Water
Column.
NATURAL GAS:
please ensure that inlet pressure does not exceed 4
” Water Column. (Also see Gas Conversion’)
!WARNING!
SHUT OFF FUEL before attempting to
install this side burner assembly.
Rev Feb 2012
J = 14.5
”
Width (Left to Right)
K = 18.5
”
Length (Front to Back)
L =
4 ½”
Depth (Top to Bottom)
N
M
O
Q
S
R
K
L
J
G
F
H
I
Non-Combustible material
ONLY
