5
Bend formed rails down
slightly (if necessary)
Figure 1
Figure 2
Figure 4
Figure 5
Figure 3
STEP 2
Drop the Side Burner assembly onto the rails that formerly supported the cutting
board. This may be a tight fit; if so, please bend the rails down slightly using
a pair of pliers (Fig. 1). This adjustment will allow the side burner to drop into place.
.
STEP 3
Install the stainless steel flexible fuel
line onto the 3/8” flared connection on side burner gas manifold.
(Fig. 2: Sealant not required).
Next, insert the flexible fuel line through the hole in left pedestal wall of the barbeque. Note that the hole should
be factory equipped with a grommet to protect the fuel line.
Remove the cap at the fuel manifold on your grill (Fig.3, 4), then connect the flex line as shown (Fig. 5).
