8
Figure 9
Figure 10
GAS CONVERSION: (Optional Orifice not included)
1. Remove the Cook Grid, Heat Shield, and Burner,
2. Remove the original O
rifice, using a ¼” Socket Wrench, with an extension and 7mm socket (Fig. 9)
3. Lightly coat threads of the replacement Orifice with Teflon Tape or Gas Fitting Dope.
4. Install the new Orifice into Side Burner (Fig. 10)
5.
Propane; Please ensure that the fuel source is regulated to 11” WC.
6. Natural Gas; Please ensure that the fuel source is regulated to 4
” WC.
Parts Needed for an LP
Conversion
Parts Needed for a NG
Conversion
JH-141: Orifice size #64
JH-142: Orifice size #53
JF-
99: 4” WC NG regulator
TECH TIP
Do NOT over tighten orifice; threads
can easily be broken off!
