dualMIG 250E
Operating manual
Page 23
Single knob program selection
program
welding material
diameter of wire
shielding gas
manual
---
---
---
1
steel
Ø 0.8
mixed gas Ar82/ CO2 18
2
steel
Ø 1.0
mixed gas Ar82/ CO2 18
3
steel
Ø 0.8
CO2
4
steel
Ø 1.0
CO2
5
CrNi
Ø 0.8
mixed gas Ar97,5/ CO2 2,5
6
CrNi
Ø 1.0
mixed gas Ar97,5/ CO2 2,5
7
Alu
Ø 1.0
argon
8
Alu
Ø 1.2
argon
9
steel
Ø 0,8
argon 91/ CO2 5/ O2 4
10
steel
Ø 1,0
argon 91/ CO2 5/ O2 4
Single-knob program selection / manual setting
To select the welding material, the weld wire diameter and the shielding gas.
1. Single-knob control (programs 1 to 10):
Upon selection of the welding voltage on the weld-grade switch, optimum wire feed rate will adjust itself
automatically.
2. Manual:
In manual control, the wire feed rate can be adjusted irrespective of the welding voltage.
