Jackery Explorer 2000 Pro, User Manual

Page: 13 / 132

GB
11
Charging from Solar
Solar Generator Connector (Tip: This accessory is sold separately)
Functions of Main Ports
Two or three solar panels can be connected in series through this adapter. To ensure that the solar
panels can exert the maximum power output, please make sure to use the same type of solar panels
when connected in series.
The solar panel charging output port (DC8020 male)
The change-over switch for changing from two to three solar panels in series
How to Use (Take 200W Solar Panel As An Example)
Jackery SolarSaga solar panels (68W, 100W and 200W) are equipped with 2 port types at the output
interface. Please refer to the following illustrations to connect the solar panel and the adapter.
When connecting two 200W solar panels, please operate as follows:
❶
The solar panel charging output unit port (DC8020 male): When charging, plug this port into the DC
input port of the Jackery Explorer 2000 Pro.
❷
The solar panel charging input port (DC8020 female): When charging, connect solar panel(s) to this port.
❸
The change-over switch for changing from two to three solar panels in series: When connecting two
solar panels to charge, the switch should be kept OFF, otherwise it cannot be charged. If the switch
is ON, three solar panels need to be connected at the same time to use it.
SolarSaga 200
SolarSaga 200×2
Explorer 2000 Pro
DC8020
DC7909
The solar panel charging input port (DC8020 female)