JackaJay
INSTALLATION GUIDE
7
2.3 Equipment
2.3.1 Tools
2.3.2 JackaJay Kit componentry
2.3.2.1 HARDWARE
Ensure the camper trailer is in a clean and tidy condition.
Ensure that all the cabinetry is empty, and access is not hindered and
ready for installation.
Unzip the top 200mm of all windows to enable air flow and place all the
curtains behind the window. This will ensure they are not obstacles when
moving greased and soiled components around the van.
During installation, it is required that JackaJay kit componentry must be sourced
prior to installation. Please see the list below in this section.
•
Battery Drill
•
Screw Drivers. 3/8”
•
90* Drill (optional)
•
32mm Hole saw
•
Small Bolt Cutters
• Hammer
•
Allen Keys - 2.0mm & 2.5mm
•
Framing timber (Advise 90mm x 35mm)
•
Framing / window shims
•
General Spanners, sockets, and drill bits
•
Marking Pen
•
Silicone based adhesive
•
4 x Motor Assemblies (1 x Red, 1 x Blue, 1 x Yellow, 1 x Green)
•
4 x Tube Assemblies (1 x Red, 1 x Blue, 1 x Yellow, 1 x Green)
•
4 x Corner Elbows (Black)
•
4 x Flexible Springs/ Pushrods.
•
2 x Saddles (securing harnesses near controller)
•
1 x JACKAJAY Badge – plate
