Jack JK-SHIRLEYIIE, Operation And Daily Service Manual

Page: 6 / 18

Press this key, the machine enters into “free sewing
mode”, the sewing length can be controlled by the
operator, that is why we called this function as“free
sewing model”. It’s often used for lap seam and bar-
tacking sewing.
Press this key, the machine enters into “fixed-stitch
sewing mode”, the sewing length and segment is
confirmed by the operator through control panel, and
sewing will be finished automatically. The operator
only needs to pedal the speed controller, then will
work automatically till finishing the trimming. It’s
often used for sewing the fixed-length thread
segment and the trademark.
Press this key, the machine enters into “W pattern
bar-tacking sewing mode”, the bar-tacking stitches
and times are set up by the operator through control
panel, and sewing will be finished automatically. The
operator only needs to pedal the speed controller,
then machine will work automatically till finishing
the trimming. It’s often used for straight bar-tacking
sewing.
Intelligent sewing
simple operation
Intelligent sewing
simple operation
You can set the stitch
length according to
customer’s requirement
,after sewing ,it will auto
trimmer and auto stop . You can set edges number
and stitch numbers of each
edge according to
customer’s requirement
,after sewing ,it will auto
trimmer and auto stop .
Common Fixed-stitch
length sewing model:
It is used to sewing
rectangular lables.
Fixed-stitch length
sewing model 2: Fixed-stitch length
sewing model 1:
Selection of Sewing Mode
6 7