6
/
8
digital tube displays "J", and the second digital tube does not display (hereinafter
referred to as the monitoring interface). Short press
to
change parameter number
in the monitoring interface, and press to display the corresponding monitoring
value. Press again in the J5 interface to switch and display the historical fault code.
Short press to return to the current serial number display interface, and short
press in J interface to return to P interface.
In J9 interface, press to switch and
display the middle value of current pedal standby position state, and then press
t
o
have further change the parameter value; If the parameter value is modified, press
save to display "oK" and return to the monitoring interface. If the parameter value is
not modified, then it will directly return to the monitoring interface.
In addition to J0,
J1 and J2 entering the display interface of pedal voltage, speed and power, the
real-time pedal voltage, power and speed will be displayed during operation. In other
monitoring interfaces, the motor will exit the j interface and return to the P interface.
The parameter number of the monitoring interface show as following sheet:
No.
Definition
Description
J0
Pedal voltage
monitoring
Display the pedal voltage value in standby and running states, and
the displayed number / 10 = the actual pedal voltage value
J1
Speed
Display the real-time speed in standby and running mode, and the
displayed number * 100 = actual speed
J2
Power
Display the real-time power in standby and running states, and the
displayed number *10 = actual power
J3
Voltage
Display the input voltage in standby mode, and the displayed
number * 10 = actual voltage
J4
Historical
maximum
voltage
Display the highest input voltage in history, and the displayed
number * 10 = actual voltage
J5
Historical error
code
Display historical error codes (dumping error E7 is not recorded,
only the latest 5 are displayed, and 00 is displayed when there is no
error record). Automatically return to the standby interface if no any
further operation within 8S
J6
Cumulative
running time of
control box
Display the cumulative operation time of electric control, and the
displayed number * 100 = actual time (hour)
J7
Aging
monitoring
For manufacture test
J8
Model code
1/FF
：
F5
；
2
：
20U
；
3
：
8558G/8560G
J9
Speed
controller
standby range
adjustment
Display the middle value of voltage under current pedal standby
state, display number/10=actual voltage. Revise the parameter, the
speed controller standby range will change according to the revise
of middle value of voltage timely.
Note: some versions have no J8 monitoring items
9.
One key to clear the error
Press to clear the error. When the system reports an error and displays an error
alarm, press
to re detect whether the error exists. If it does not exist, the error alarm
will be released, and if it exists, the alarm will continue (this function is only limited
to E4, E5 and shutdown reminder of); When the system reports error E5 (abnormal
locator signal) or E7 (head safety switch alarm), long press
to close the needle stop
