4
• The juicer will not run if the unit is not properly assembled. The motor has
a built-in safety feature that will not allow the power to turn on unless the
Locking Bar is locked in place.
• Do not use outdoors.
• Be sure to turn switch to OFF position after each use of your juicer. Make
sure the motor stops completely before disassembling.
• Do not use the appliance if the rotating Filter is damaged.
* This appliance has a polarized plug (one blade is wider than the
other). To reduce the risk of electric shock, this plug will fit in a
polarized outlet only one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. Do not modify or force the plug in any way.
• Do not operate without the pulp container in place.
SAFETY FEATURES
The Power Juicer was designed with safety in mind .
We have added two important safety features:
the Automatic Shut Off and the Locking Bar .
Built-In Thermal Cut Off Switch/Automatic Shut Off
Unlike other juicers, the Power Juicer is equipped with a special feature
that automatically shuts off the motor should the unit become jammed or
overheated during the juicing process. Prior to shut down, you will most
likely hear the juicer get louder. This will indicate that something has caused
the motor to strain. Should this happen, simply turn the Power Switch off
and unplug the unit… follow the Disassembly, Cleaning and Assembly
process, then allow the unit to cool for 10 minutes. The unit will restart
and you may resume the juicing process. There are some additional reasons
that could cause a “shut down”. You can find them in the trouble shooting
section of your operating manual on page 15.
The Locking Bar
The Locking Bar holds the juicer Lid/Pulp Guard in place and is connected
to an auto shut-off switch. If the Locking Bar is not in its full upright and
locked position, the juicer will not start. This is to prevent accidental contact
with the spinning Blade. If the machine is not locked, the motor will not
engage and the Blade will not spin.
SAVE THESE INSTRUCTIONS
