8
9
ASSEMBLY (Cont.)
Receptacle
Locking
Bar
Pulp
Collector
Lid/Pulp
Guard
STEP 4:
Place lid with built-in pulp guard on
top of receptacle, making certain it is
securely aligned with the pulp guard
facing in the opposite direction of
juice spout. Lock lid into place by
lifting locking bar up until it clicks
into grooves located on both sides of
the lid. Make sure locking bar is in the
full upright, locked position.
IMPORTANT: The unit will not start
until this bar is properly locked
in place and the pulp collector is
properly assembled.
4
STEP 5:
Place produce in Chute then insert
Pusher into Chute aligning groove on
Pusher with fin inside Chute. Always
use the Pusher when inserting fruits
and vegetables into the chute. Push
gently, never force. The Filter/Blade
will do the work.
5
Lid/Pulp
Guard
Pusher
Chute
Groove on Pusher
Fin in Chute
